How to Reset Twinkly Lights

Are you having trouble re-lighting your twinkly lights? If so, don’t worry―you’re not alone! Twinkly lights are a popular decoration for all kinds of events, but they can be tricky to reset. Here’s how to do it: firstly, make sure the power is off, and the main switch is set correctly. Then, check if any of the bulbs need replacing or have broken connections in the wires.

Once this has been taken care of, carefully untangle any knots in the wire and inspect each bulb for damage or dirt buildup.

How to Reset Twinkly Lights

Finally, plug them back into their respective ports in reverse order from when you disconnected them—this helps ensure that every light receives its proper current levels without failure. Read on for more helpful tips about how to reset twinkly lights for resetting your twinkle lights successfully!

What Causes Twinkly Lights?

1. Power Surge

Sometimes, twinkly lights stop working due to a power surge or short circuit. This can happen when they are connected to an electrical outlet that isn’t properly grounded or if the wires become damaged from over-bending and twisting.

2. Broken Bulbs

Twinkly lights can also fail due to a broken bulb or corroded connections. This is usually caused by age, extreme temperatures, or vibrations that cause the glass of the bulb to become brittle over time and eventually break away from the base of the light fixture.

3. Bad Connection

If the twinkly lights are connected to a dimmer switch or an extension cord, then there could be a bad connection somewhere along the line. This can happen if the wire has been pinched too tightly or if it was installed incorrectly in the first place.

These are just some of the possible causes for why your twinkly lights may not be working properly. If you’re still having trouble resetting them, contact the manufacturer or an electrician for further assistance and advice.

Required Items

Before resetting your twinkly lights, you’ll want to make sure that you have all of the necessary items. This includes a screwdriver and replacement bulbs if needed, as well as any other tools that may be required, such as wire cutters and strippers. Additionally, you should also turn off the power before making any repairs.

10 Tips on How to Reset Twinkly Lights

1. Turn Off the Power

Make sure the power is turned off. You should not attempt to reset twinkly lights while the power is on, as this increases the risk of electric shock and could damage the lights. The power supply should also be disconnected from the wall outlet before any work is done.

Power Supply Should Be Disconnected

2. Check for Damage

If twinkly lights are not working, check all of the bulbs for damage or dirt build-up. It’s also a good idea to inspect the wiring and connections to make sure that everything is securely connected and not pinched or frayed.

3. Replace Bulbs

If there are any bulbs that need to be replaced, it’s important to do so before attempting to reset the lights. This will ensure that all of the lights receive the same amount of power and work properly after resetting.

4. Disconnect Wires

Carefully untangle any knots in the wires and disconnect them from their ports. Make sure to keep track of which port each wire is connected to so that you can reconnect them properly later on. The wires should be disconnected in reverse order from when they were initially connected.

5. Clean Connections

With the wires disconnected, use a dry cloth to clean any dirt or buildup on the connections. This will help ensure that all of the lights receive an equal amount of power and prevents them from overheating or malfunctioning.

6. Reconnect Wires

Once the connections are clean, reconnect all of the wires in reverse order from when they were disconnected. Make sure to double check that each wire is securely connected and not pinched or frayed.

7. Test Lights

After everything has been reconnected, plug in the power supply and turn it on. The lights should turn on and work properly. If they do not, make sure all of the wires are securely in place and that the bulbs have been replaced correctly.

8. Reset Twinkly Lights

If everything appears to be connected correctly, you can reset the twinkly lights by pressing and holding down the power button for five seconds. The lights should reset and start working again.

Holding Down the Power Button for Five Seconds

9. Check Lights Again

Once the lights have been reset, it’s important to test them one last time to make sure that everything is working correctly. If any of the lights still appear to be malfunctioning, you may need to repeat some of the steps outlined above until they are functioning properly.

10. Turn Off the Power Supply

Once the twinkly lights have been reset and are working properly, turn off the power supply and disconnect it from the wall outlet before leaving the area. This will help to ensure that your lights remain in optimal condition and work properly when they’re needed.

Following these steps should help you reset your twinkly lights and get them working properly again. If you’re still having trouble after following these steps, contact the manufacturer or an electrician for further assistance and advice. With proper care and maintenance, your twinkly lights should continue to provide beautiful lighting solutions in any area of your home!

8 Maintenance Tips to Prevent Twinkly Lights

1. Ensure the proper power source. Make sure your Twinkly lights are plugged into the proper power source, such as a wall outlet or compatible USB port. Always remember to use the correct power adapter for your Twinkly lights.

2. Ensure internet connectivity. Make sure you are connected to a reliable and stable internet connection when setting up or resetting your Twinkly lights. This will help ensure the process runs smoothly and quickly.

3. Clean off any dust or debris from the device often. Dust, dirt, and debris can get in the way of your Twinkly Lights performance. Cleaning it regularly will help keep your device running smoothly and prevent any issues that could interfere with its operation.

4. Make sure your device is up-to-date on software updates. Periodically check for any new updates to ensure optimal performance from your Twinkly lights.

Periodically Check for Any New Updates

5. Avoid using a surge protector or power strip if possible. This can cause interference with the power supply, which may result in an unreliable connection or even device damage. Always use the correct power adapter for your Twinkly lights.

6. Test the connection often. Make sure all of your Twinkly lights are still connected to your network and that there is a strong signal being received. If you notice any lag or dropped connections, refer to the troubleshooting guide in order to fix the issue quickly.

7. Make sure the device is securely connected to any wall outlets or USB ports. Loose connections can prevent your Twinkly lights from working properly and cause them to reset unexpectedly – so make sure all of the connections are secure.

8. Consider investing in a surge protector for added protection. Power surges can cause unexpected power outages, which could result in your Twinkly lights having to be reset. Investing in a surge protector will help protect your device from any unexpected power issues.

By following these eight tips, you can ensure that your Twinkly lights remain operational and that all of the necessary steps are taken to avoid needing to reset them unexpectedly. Doing periodic maintenance on your device will help to prevent any issues from arising and keep it running optimally.

Frequently Asked Questions

Can You Connect Twinkly Lights to an App?

Yes, you can connect your Twinkly lights to an app! This makes it easy to customize and control your lights from any device. You can adjust color, brightness, effects, and more with just a few taps on the screen. It will even let you set up schedules so your lights will turn on and off automatically.

Control Your Lights From Any Device

How Much Will It Cost?

The cost of Twinkly lights will depend on the size and features you choose. Generally, a starter pack with up to 150 LED lights can be found for around $120 USD. However, larger packs may cost more depending on the brand and number of LEDs included.

How Long Does Battery Last?

Twinkly lights come with rechargeable batteries. Depending on the type of lights you select, battery life can last anywhere from 8 to 24 hours. To maximize battery life, make sure you charge your lights regularly and use low brightness settings when possible.


Resetting your twinkly lights can be a time-consuming and confusing task, but with a few simple steps, the process shouldn’t take more than a few minutes. Take a look at your timer and hard reset switch if you find yourself having trouble. And if all else fails, refer to the user manual or contact customer service for additional guidance.

Whether you want to use your twinkle light fixtures for decoration or just want them working correctly for everyday use, following our above instructions on how to reset twinkly lights will get them up and running again in no time. We wish you luck in this endeavor, and may your holiday season be brighter than ever!

Photo of author

Jennifer Branett

Leave a Comment