Govee is a brand known for its high-quality LED lights in all shapes and sizes. While most Govee lights come with a built-in reset function, there are times when you may need to reset them manually. For example, you may need to reset the lights if you have ever experienced problems with your Govee LED lights, such as the light not turning on or flickering.
In this blog post, we will walk you through the process of how to reset Govee LED lights manually. First, make sure that the light is turned off and unplugged. Next, hold down the power button for about 10 seconds until the light begins flashing. Finally, release the button and plug in the light. The light should now be reset and work properly. Read on for more details.
Can You Reset Govee Led Lights?
Resetting Govee Led Lights is a simple process that can be done in a few steps. First, turn off the power to the lights and disconnect them from any power sources. Then, use a small object like a paper clip to press and hold the reset button for 10 seconds. Finally, reconnect the lights and turn the power back on.
Resetting your Govee Led Lights can solve issues like flashing or flickering, unusual color changes, and unresponsive remote control. Resetting the lights every once in a while can also ensure they continue to function at their best. So don’t hesitate to reset your Govee Led Lights when needed – it’s an easy fix for any problems you may encounter.
Step-by-Step Guide: How to Reset Govee Led Lights
Step 1: Unplug the Light Strip From the Power Source
The first thing you need to do is to unplug the light strip from the power source. Once it is unplugged, press and holds the reset button for 3 seconds; make sure that the reset button is held down for 3 seconds. If your light strip does not have a reset button, then you can simply remove the batteries for about 10 seconds before putting them back in.
Step 2: Check If the Controller Is Working
Next, you need to check if the controller is working. To do this, you can plug in the light strip and see if it turns on. Make sure that the controller is turned on as well. If the light strip does not turn on, then you will need to replace the controller. Check if the controller is working by pressing the button on the controller. If the light strip does not turn on, then you will need to replace the controller.
Step 3: Cut Off the End of the Light Strip
If your light strip is still not working after following the previous steps, you may need to cut off the end of the light strip and reattach it. Ensure the cut-off end has the proper connection for your light strip. You can solder the wires directly to the board if your light strip has no connector. Ensure that the + and – wires are connected to the correct pads on the board and that there is no loose connection.
Step 4: Attach the Power Connector
Now you can attach the power connector to the light strip. Make sure that the power connector is facing the correct way before attaching it. If your light strip has a power adapter, plug it into an outlet. If the power connector is not facing the correct way, the light strip will not work.
Check if the light strip is working by pressing the button on the controller. If the light strip does not turn on, then you will need to replace the controller.
Step 5: Check if the Remote is Working Properly
If you are using a remote to control your Govee LED light strip, you might want to check if the remote is working properly. To do this, simply press and hold the power button on the remote for 3 seconds. You will need to replace the remote if the light strip does not turn on. You should also check the batteries in the remote and ensure they are properly installed.
Step 6: Press and Hold the Reset Button
If your light strip is still not working, you can try resetting it by pressing and holding the reset button for 3 seconds. Once the reset button is released, the light strip should start working again.
If your light strip does not have a reset button, you can simply remove the batteries for about 10 seconds before putting them back in. This should also reset the light strip. If the light strip still does not work, then it is likely defective, and you will need to replace it.
Step 7: Check if The light Strip is Flashing
If the light strip is flashing, there is a problem with the connection. Make sure the power connector is facing the correct way before attaching it. If your light strip has a power adapter, plug it into an outlet. If the power connector is not facing the correct way, the light strip will not work. Check if the power adapter is plugged into the correct outlet. If it is, unplug it and plug it back in.
If the light strip is still flashing, there may be a problem with the light strip itself. Try resetting the light strip. To do this, unplug the power adapter from the outlet. Make sure that the power connector is not plugged into the light strip. Press and hold the reset button for 3 seconds. The light strip will reset, and the LEDs will turn off.
Step 8: Replace the Light Strip
If your light strip is still not working, it is likely defective, and you will need to replace it. You can purchase a new light strip from Gove’s website or a retailer. Follow the instructions in the user manual to properly install the new light strip. Ensure the power is turned off before attempting to replace the light strip.
If you have any questions or concerns, please get in touch with Gove’s customer service department. They will be happy to help you troubleshoot the issue and find a resolution. If you have any other questions or concerns, please get in touch with us at any time. We are always happy to help! Thank you for choosing Govee!
Troubleshooting Govee Led Lights
If your Govee Led Lights are not working correctly, you may need to reset them. To do this, follow these steps:
- Unplug the power adapter from the wall outlet.
- Remove the batteries from the remote control.
- Press and hold the power button on the back of the Govee Led Light for 5 seconds.
- Reconnect the power adapter to the wall outlet and insert the batteries into the remote control.
- Press the power button on the remote control to turn on the Govee Led Lights.
You should now see the lights working properly. However, if you are still having issues, please get in touch with customer support.
What to Do if Your Govee Led Strip is Not Working?
If your Govee LED strip stops working, there are a few things you can try to reset it. Sometimes, simply unplugging the strip and plugging it back in will do the trick. If that doesn’t work, you can try resetting the strip by holding down the power button for 5-10 seconds. If neither of these methods works, you may need to replace the LED strip.
You should check the following things before you begin:
- Ensure the power supply is properly connected to the strip and plugged into an outlet.
- Make sure the controller is properly connected to the strip.
- Ensure that there are no loose connections between the power supply, controller, and strip.
If your Govee LED strip isn’t working after checking these things, you can try resetting it by holding the power button for 5-10 seconds. If that doesn’t work, you may need to replace the LED strip.
How Do You Put a Govee Led in Pairing Mode?
To put the Govee Led in pairing mode, you need to:
- Press and hold the power button on the back of the Govee Led for 3 seconds.
- The Govee Led will enter into pairing mode, and the indicator light will flash quickly.
- Once the Govee Led is in pairing mode, you can connect it to your device via Bluetooth.
- Once the Govee Led is connected to your device, you can start using it.
If you are having trouble with your Govee lights, resetting them may be the solution. Though resetting your Govee Led Lights may seem daunting, it is a very quick and easy process. In addition, resetting your lights will likely fix the issue if your lights are not working properly.
By following the steps outlined in this blog post on how to reset govee led lights, you’ll be able to get your lights back up and running in no time. So next time your lights aren’t working properly, don’t panic – follow these simple instructions, and you’ll be good to go! Thanks for reading, and we hope this article was helpful!