How to Bypass a Motion Sensor on a Flood Light

Are you looking for a way to bypass your flood light’s motion sensor so that it will stay on all night? If so, then you’ve come to the right place! In this blog post on how to bypass a motion sensor on a flood light, we’ll be taking an in-depth look at exactly how to disable the motion-sensing capabilities of flood lights. We’ll walk through the step-by-step process from start to finish – no electrician needed!

How to Bypass a Motion Sensor on a Flood Light

Plus, we’ll also provide additional tips and guidelines along the way. So whether you’re trying to avoid having your lights turn off when they sense movement (unwanted or not!), or if you just want some peace and quiet while sleeping at night – keep reading and learn how easy it is to bypass your motion sensors today!

What is Flood Light?

A flood light is a type of lighting fixture typically used for outdoor security and landscape lighting. These lights are typically mounted at high levels, such as on the side of buildings or in trees, and they use motion sensors to turn on when movement is detected.

How Does a Motion Sensor Work?

Motion sensors work by sending out an invisible beam that detects any movement within its range. When the beam is triggered, it causes the floodlight to turn on for a certain length of time before turning off again.

Why You Might Want to Bypass a Motion Sensor?

There are several reasons why you might want to bypass your motion sensor. For instance, if you live in an area with lots of wildlife that set off the sensors every night (such as deer or coyotes), then having your lights constantly turned on and off can be quite annoying – not to mention wasteful! Additionally, if you have a deep sleep schedule, then having your lights wake you up each time they sense movement can also be disruptive.

10 Step-by-step Instructions on How to Bypass a Motion Sensor on a Flood Light

Step 1: Turn Off the Power to the Flood Light

Before you start the process of bypassing your motion sensor, it’s important to first turn off the power to the flood light. You can do this either by switching off the breaker or unplugging the power cord from the wall. It’s important to make sure the power is completely off – or else you risk electric shock! But once you’ve done this, you can move on to the next step.

Turn Off the Power to the Flood Light

Step 2: Remove the Cover of the Flood Light

Once you’ve shut off the power, it’s time to open up your flood light and gain access to its internal components. The cover should come off easily with a flathead screwdriver. But if it’s stuck, you can use a small amount of lubricant (such as WD-40) to help loosen the screws. It’s important to be gentle here – as you don’t want to do any damage. This will also reveal the motion sensor itself.

Step 3: Locate the Motion Sensor Wires

Inside your flood light, you should be able to locate two wires coming out of the motion sensor. These are usually labeled on the inside of the casing and will be connected to two separate terminals on one side of your flood light.

It’s important to take note of which wire is which before moving on to the next step! If you’re having trouble finding the wires, you can use a voltage tester to help locate them.

Step 4: Disconnect Motion Sensor Wires

Once you’ve located the wires, it’s time to disconnect them. To do so, simply grab one of the wires and carefully pull it out of its terminal. Do the same with the other wire until both have been disconnected. This will effectively remove the motion sensor from your flood light, allowing you to bypass it completely. But don’t forget to turn the power back on before you move on to the next step!

Step 5: Cover Exposed Terminal Connections

With your motion sensor now disconnected from your flood light, it’s important to cover up any exposed connections on the terminals to prevent any potential shorts or sparks. You can use electrical tape for this, or even hot glue if you don’t have any tape readily available.

Your Motion Sensor Now Disconnected

If you’re using hot glue, make sure to let it dry completely before moving on to the next step. However, you can skip this step if your terminal connections are already covered.

Step 6: Connect Flood Light Wired Directly to Power Source

Now that you’ve removed the motion sensor from your flood light, it’s time to connect the light directly to your power source. To do so, simply follow the instructions on your light’s manual and connect the two wires coming off of the light to their corresponding terminals on the wall. It’s important to make sure these connections are secure, as any loose wiring could potentially cause a short.

Step 7: Turn On the Power Source

Once you’ve connected everything up properly, it’s time to turn back on your power source and test out your new setup. If all goes well, you should now have a flood light that is constantly turned on – regardless of any motion detected! You should also make sure to check for any sparks or shorts – just in case something went wrong during installation. In that case, it’s important to turn off the power and investigate further.

Step 8: Mount Flood Light Cover

With your floodlight now bypassed and working as intended, it’s time to put the cover back on so that everything looks neat and tidy. Take care to make sure that the cover is properly secured before moving on to the next step. Otherwise, you may risk having your light fall off at some point in the future.

Step 9: Test Flood Light

Before you put away your tools and call it a day, it’s important to test out your flood light one last time – just in case anything was missed during the installation process. To do this, simply wave your hand or something else in front of the floodlight to see if it still turns off when triggered by motion. If not, then you’ve successfully bypassed the motion sensor! If it does, then you may need to investigate further.

Test Out Your Flood Light

Step 10: Enjoy Your Motionless Flood Light!

And with that, you can now enjoy your new motion-free flood light! No more wasted energy or disruptive sleep – just a constant light that will stay on all night, every night.

If you ever need to change your light’s settings or add a motion sensor back in, simply refer back to these instructions and follow the steps in reverse. Have fun! Always remember to practice safety when dealing with electricity.

Congratulations on successfully bypassing your motion sensor! We hope this blog post on how to bypass a motion sensor on a flood lighthas been both helpful and informative. Thanks for reading, and happy lighting!

Frequently Asked Questions

Q: Can I Use the Bypassed Flood Light for Security Purposes? 

A: While a bypassed flood light is still capable of providing lighting, it will not be able to detect movement and alert you of any intruders. As such, if security is your primary concern, then you may want to consider purchasing a motion-sensing flood light instead.

Q: Will Bypassing the Motion Sensor Void My Warranty? 

A: It depends on the terms and conditions of the warranty in question. Generally speaking, most warranties don’t cover modifications or alterations made to products, so bypassing your motion sensor could void any existing warranties that cover your flood light.

Q: Can I Reinstall the Motion Sensor Later On? 

A: Absolutely! As long as all connections are properly secured and double checked before turning the power back on, then you should have no problem reinstalling the motion sensor at a later date.

Q: Are Motion Sensing Flood Lights Worth the Investment? 

A: Motion-sensing flood lights are a great way to save energy and add extra security to your home or office. Despite the initial cost, they are generally worth the investment in the long run as they can help you save money on energy bills and provide an extra layer of protection from intruders.

Sensing Flood Lights Are a Great Way


Bypassing a motion sensor on a flood light may seem like an overwhelming task, but with the right tools, some patience and the correct safety precautions, it can be done quickly and easily! Remember to turn off the power before beginning any electrical project and to reference helpful manuals or contact an electrician if you feel unsure about what steps to take next.

Although this post on how to bypass a motion sensor on a flood light was focused on bypassing a motion sensor, if it’s time to make other adjustments around your home such as removing a stopper from your bathroom sink, know that it can also be done relatively quickly with the right tools or help.

With these tips in hand, you should have all of the confidence needed to complete these several projects safely. Now go forth and show Mother Nature who is really in charge!

Photo of author

Jennifer Branett

Leave a Comment