How to Use Light Keeper Pro on Pre Lit Tree

Embracing the festive spirit, pre-lit Christmas trees have become a popular centerpiece of holiday decorations. Yet, encountering a burnt-out bulb can dampen the joyful atmosphere. This is where the Light Keeper Pro steps in as a holiday hero, promising to swiftly restore the twinkle to your tree.

Designed with simplicity and efficiency in mind, the Light Keeper Pro is a specialized tool that aids in identifying and replacing faulty bulbs within a pre-lit tree’s intricate lighting network. Its user-friendly features make it accessible to both seasoned decorators and holiday enthusiasts alike.

How to Use Light Keeper Pro on Pre Lit Tree

In this article, we delve into the essential steps and insights on how to use light keeper pro on pre lit tree, ensuring that your pre-lit tree shines brightly throughout the holiday season. Say goodbye to darkened sections and hello to a beautifully illuminated Christmas tree, all thanks to the ingenious functionality of the Light Keeper Pro.

Importance of Maintaining Well-Functioning Lights for a Festive Atmosphere

Maintaining well-functioning lights on a pre lit tree is essential for creating a festive atmosphere during holiday celebrations. Luckily, the LightKeeper Pro can help you do just that!

This easy-to-use tool makes it possible to fix broken light strands in a matter of minutes and get your holiday decorations back up and running quickly – so you can focus on enjoying the season. Although the LightKeeper Pro can be used on any type of holiday lighting, it’s especially effective for pre lit trees. Let’s take a look at how to use this tool with pre lit trees.

First, make sure your tree is unplugged and that all of its lights are off. Then, locate the first broken light or dead spot in the tree. Insert the LightKeeper Pro into an outlet that’s near the broken light or dead spot and press the access button to activate it.

Finally, clip the device onto one of the wire strands at either side of where you located the problem, with its red tip pointed towards the dead section. Once you do this, you should hear a crackle as electricity flows through the line. This means that the problem has been fixed!

If the problem persists, you can repeat this process and clip onto a separate wire strand at either side of the dead section. If all else fails, make sure to replace any lights that are not working properly in order to ensure your tree is shining brightly throughout the holiday season.

With just a few simple steps, the LightKeeper Pro can help you save time and energy when dealing with those pesky pre lit tree lights.

Lightkeeper Pro Can Help You Save Time

Tools and Materials Required

To effectively use the Light Keeper Pro on your pre-lit tree, you will need the following tools and materials:

  1. Light Keeper Pro: This is the main tool used for fixing the lights on your pre-lit tree.
  2. Replacement Bulbs: Keep a stock of replacement bulbs that match the ones on your tree.
  3. Batteries: The Light Keeper Pro operates on batteries, so ensure you have some handy.
  4. Safety Gloves: To protect your hands when handling the bulbs and wires.
  5. Ladder or Step Stool: Depending on the height of your tree, you might need a ladder or step stool to reach the upper branches.

Remember, safety is paramount. Always turn off and unplug your tree before you start working on it.

10 Steps How to Use Light Keeper Pro on Pre Lit Tree

Step 1: Familiarize Yourself with the Light Keeper Pro

Before diving into the troubleshooting process, take a moment to familiarize yourself with the Light Keeper Pro. Study its components, including the bulb tester, voltage detector, and audible continuity detector. Understanding the tool’s functionality will make your troubleshooting efforts smoother.

Step 2: Identify the Problematic Section

Examine your pre-lit tree and identify the section with malfunctioning lights. This could be a dimly lit area or a section where the lights are entirely out. Once located, unplug the tree from the power source to ensure safety during the troubleshooting process.

Step 3: Inspect the Bulbs

Begin your troubleshooting by visually inspecting the lights in the problematic section. Look for burnt-out, broken, or missing bulbs. Remove any bulbs that appear faulty and set them aside for replacement. It may be helpful to keep a record of the bulbs you’ve removed in case you need to purchase replacements.

Visually Inspecting the Lights

Next, check for loose connections by gently wiggling the bulbs. If any become loose, tighten them until they are secure. This should fix minor electrical problems that could be causing your pre-lit tree to malfunction.

Step 4: Use the Bulb Tester

Insert the bulb tester attachment into the Light Keeper Pro. Insert the tester into the empty socket of a removed bulb. If the bulb is functioning, the tester’s LED light will illuminate. This step helps you identify which bulbs need replacement and which ones are still operational.

Step 5: Test Bulbs for Continuity

For bulbs that didn’t light up using the bulb tester, it’s time to check for continuity using the Light Keeper Pro’s audible continuity detector. This feature emits a beeping sound when continuity is detected, helping you identify bulbs that might have loose or broken filaments.

Simply insert the bulb into both ends of the Light Keeper Pro and press the “Test” button. If continuity is detected, you’ll hear a beeping sound. Replace any bulbs that fail this test.

Step 6: Replace Faulty Bulbs

Once you’ve identified the bulbs that are causing the issue, replace them with new bulbs of the same wattage and type. Ensure that the replacements are securely seated in their sockets to establish proper connections.

Step 7: Use the Voltage Detector

If replacing bulbs doesn’t resolve the problem, the issue might lie with a faulty socket or wiring. Switch to the voltage detector mode on the Light Keeper Pro. Plug in the tree and hover the voltage detector over the sockets in the problematic section. The voltage detector will indicate if there’s power flowing through the wiring.

Hover the Voltage Detector Over the Sockets

Step 8: Check for Loose Wires

If the voltage detector reveals that power is reaching the sockets but the lights still don’t work, the problem could be loose or disconnected wires. Gently tug on the wires to check for any loose connections. Reattach any loose wires securely to the socket.

Step 9: Utilize the Audible Continuity Detector

If you’ve eliminated loose wires as the issue and the lights remain unresponsive, use the Light Keeper Pro’s audible continuity detector on the wiring. This will help you identify any broken or disconnected wires within the section.

Step 10: Test and Enjoy

After replacing faulty bulbs, securing loose connections, and addressing wiring issues, plug in the tree and admire the restored brilliance of your pre-lit tree. The Light Keeper Pro’s intuitive features have enabled you to troubleshoot and fix the problem, ensuring a beautifully illuminated holiday centerpiece that captures the magic of the season.

Restored Brilliance of Your Pre-lit Tree

Things to Consider When Using Light Keeper Pro on Pre Lit Tree

It’s important to understand how the Light Keeper Pro works when applied to a pre lit tree. Here are some key things you should consider:

  1. Make sure that all of the lights on your pre lit tree are turned off before using the Light Keeper Pro. It is not recommended to use it while any light bulbs or fuses are still in operation.
  2. Check the fuses on your pre lit tree before using the Light Keeper Pro: The fuse should be replaced if it is broken or if there are any signs of corrosion. This will help protect the life and longevity of your lights.
  3. Start at one end of the string of lights and work your way to the other end. Do not skip any light bulbs or fuses.
  4. The Light Keeper Pro may take a few moments to detect the bad bulb or fuse, so be patient and wait for it to do its job.
  5. When you find a bad bulb or fuse, don’t forget to replace it with one that is compatible with your pre lit tree’s lighting system. This will help ensure that your lights are running smoothly and efficiently for many years to come.
  6. After replacing the bad bulbs or fuses, turn the lights back on and enjoy your pre lit tree!
  7. Don’t forget to store the Light Keeper Pro in a safe place after use; it should not be left outside in harsh weather conditions as this could damage its components.

Using the Light Keeper Pro on your pre lit tree is a simple process that can provide many years of worry-free lighting enjoyment. With proper care and maintenance, you can keep your lights shining year after year. So make sure to use the Light Keeper Pro each time you set up and take down your Christmas tree, and enjoy the holiday season with the perfect lighting display.

Make Sure to Use the Light Keeper Pro

Some Common Mistakes to Avoid When Using Light Keeper Pro on Pre Lit Tree

When you’re using Light Keeper Pro on a pre-lit tree, it’s important to avoid some common mistakes that could damage the tree or cause unexpected problems. Here are a few tips to keep in mind when using your Light Keeper Pro:

  1. Ensure all lights are connected properly before adding any additional decorations such as tinsel or garland. If lights are not connected properly, Light Keeper Pro will not be able to identify the problem and could result in a damaged tree.
  2. Always use fresh batteries when operating the Light Keeper Pro. If your device is running on old or weak batteries, it may not have enough power to properly diagnose your pre lit tree.
  3. Do not use the Light Keeper Pro on any other type of Christmas tree, such as a traditional or artificial one. This could cause damage to the tree and your device.
  4. Do not leave the Light Keeper Pro plugged in for more than 30 minutes at a time. Leaving it plugged in longer can cause overheating and potential short circuits that may damage your pre lit tree or your device.
  5. Keep the Light Keeper Pro away from other electrical items or cords since these could interfere with the device’s operation.
  6. Make sure that you only use LED bulbs, as these are designed to work best with the Light Keeper Pro. Using incandescent bulbs may not be detected by the device and could cause unexpected problems with your pre lit tree.
  7. When storing the Light Keeper Pro, be sure to keep it in a cool, dry place away from humidity or heat sources that may damage the device.
  8. Always follow safety instructions when using the Light Keeper Pro and never attempt to open or repair the device yourself. Doing so could cause serious harm and void any warranty included with the product.

By following these tips, you can ensure that your Light Keeper Pro will work properly on your pre lit tree and help keep it safe and looking great for years to come!

Keep It Safe and Looking Great for Years


Upon completion of this process, you have now successfully made use of your Light Keeper Pro to help repair any broken strands on your pre lit tree. With the tips and tricks outlined above, you can not only better recognize a malfunctioning strand but also quickly make the necessary repairs.

Furthermore, you are now capable of troubleshooting other types of lighting issues on multiple kinds of trees with the help of the Light Keeper Pro.

So get out there, unplug those strands, and start repairing your tree like a pro today! Remember that you can always refer back to this article if needed for any extra guidance on how to use Light Keeper Pro on Pre Lit Trees.

We hope it has been as useful and informative for you as it has been for us in our efforts to decorate our homes with beautiful bulbs and glimmering strands during the holiday season!

Photo of author

Jennifer Branett

Leave a Comment