How to Stop Geeni Light From Blinking

Geeni lights are a popular choice for home lighting and can add a touch of style to your living space, but they can be prone to blinking. This is normally caused by an issue with the power source, such as a faulty or outdated socket, and it can become very annoying after a while. Fortunately, there are ways you can stop your Geeni light from blinking and keep it running smoothly.

How to Stop Geeni Light From Blinking

Cost savings are the main advantage of using the Geeni light to stop blinking. The technology used in the lights allows them to use very little power, which results in a lower electricity bill. Additionally, it keeps your home safer and provides extra protection against intruders or other dangers. In this blog post, You will learn how to stop geeni light from blinking.

Step by Step Processes for How to Stop Geeni Light From Blinking

Step 1: Inspect the Geeni Power Adapter

Firstly, check if the power adapter is plugged in properly. Make sure the power outlet is on and functioning. If it’s not, replace it with a new one that works. Try resetting your Geeni bulb by turning off the light switch for 30 seconds, then turning it back on again. This will reset the bulb and should stop it from blinking.

Step 2: Uninstall & Re-Install Your Geeni App

If the previous step didn’t work, uninstall and reinstall your Geeni app. This should help fix any connection or firmware issues with the app that might be causing the problem. If the Geeni bulb is connected to your home Wi-Fi network, try setting up a new connection. This may fix any issues with the existing connection that might be causing your light to blink.

Step 3: Check for Firmware Updates

Make sure your device and the Geeni app are both up to date with any available firmware updates. This will help fix any bugs or issues that are causing the blinking. If your home network is affected by other wireless devices nearby, try moving them away from the router and modem. This should fix any interference that might be causing the blinking issue.

Step 4: Use a New Power Source

If none of the above steps work, try plugging your Geeni bulb into a different power source. This might help fix any electrical issues that are causing it to blink. Try resetting your router by turning it off for 30 seconds and then back on again. This will clear out any temporary problems that might be causing the device to blink.

Step 5: Replace Your Geeni Bulb

If none of these steps work, try replacing your Geeni bulb with a new one. This should fix the problem and stop it from blinking. If all else fails, contact customer support for assistance. They should be able to provide further help and solve your problem.

Replacing Your Geeni Bulb

Following these ten steps, you can stop your Geeni light from blinking. Remember to always refer back to these steps if the issue arises again. If the issue persists, contact customer support for additional help and guidance.

Tips for How to Stop Geeni Light From Blinking

  1. Always ensure that the outlet the Geeni light is plugged into is working properly and isn’t faulty or damaged in any way, as this could cause it to blink uncontrollably.
  2. Never pull the plug directly from the outlet, always use the power switch to turn it off first and then unplug it if necessary.
  3. Ensure that your Geeni light is not overheating by keeping it away from direct sunlight or other heat sources.
  4. Check for any damage or frayed wires in the cord of the Geeni light and replace it if necessary.
  5. Ensure that the firmware and software of your Geeni light are up-to-date so that any glitches or bugs causing it to blink can be fixed.
  6. If none of these solutions work, consider contacting a qualified electrician to resolve the issue.
  7. Always keep your Geeni light safe and secure away from curious children or pets.

Following these simple steps will ensure that you can effectively stop the blinking of your Geeni light, allowing it to work properly again. If you have any questions or need more help with this particular issue, please contact us so we can assist you further.

What Kind of Geeni Light Are You Trying to Stop From Blinking? 

If you’re trying to stop a Geeni light from blinking, the first step is to identify what type of light you have. Geeni lights come in three main types: smart LED bulbs, switches, and plugs.

Depending on the type of Geeni light you have, there are different steps to stop it from blinking. For starters, if you have a Geeni smart LED bulb, resetting it is the easiest way to stop it from blinking. To do this, simply turn the light off and on five times quickly in succession.

You Have a Geeni Smart  LED Bulb

If you have a Geeni switch or plug, stopping it from blinking is slightly different. In this case, you’ll need to remove the device from your Geeni app first. Once it has been removed, turn the switch or plug off and on five times as before.

This should reset the device and stop it from blinking. No matter what type of Geeni light you have, the next step is re-adding it to your home network. To do this, simply follow the instructions that came with your device and use the Geeni app to connect it back to your network.

Are There Any Other Potential Issues That May Be Causing the Blinking? 

Yes, there are a few potential issues that could be the cause of your Geeni light blinking. First, you may have an issue with your Wi-Fi connection. Ensure that your device is connected properly and uses the correct channel for your router or access point. If this doesn’t fix the problem, you’ll want to check for any other potential issues with your device.

Second, you may have an issue with the firmware on the Geeni light. Your device’s settings may need to be corrected or updated, so it could be worth checking to see if there are any available updates. Third, you may have a loose connection between the plug and the outlet or between the wall switch and the Geeni light.

Check to make sure that all connections are secure and properly in place. Finally, if you’ve tried all of these potential fixes and none have worked, then it may be time to contact customer service at Geeni for further help.

What Troubleshooting Steps Have You Already Tried to Stop the Blinking? 

If you’ve already tried the basic troubleshooting steps to stop a Geeni light from blinking, such as uninstalling and reinstalling the app or power cycling your device, but it continues to blink, there are other methods you can try.

First, open the Geeni application on your mobile device and check that all your settings are correct. Ensure your device is connected to the same network as the Geeni light, and check that the light is properly paired with the app. You should also ensure you have entered your Wi-Fi credentials correctly in the app’s settings.

 Reinstalling the App or Power Cycling Your Device

If all of these settings check out, try resetting the Geeni bulb or device by unplugging it for at least 30 seconds and then plugging it back in. This should reset the device and allow you to start fresh with a new configuration. If these steps don’t work, you can contact Geeni’s customer support team via their website or app for further troubleshooting assistance. They can help resolve the issue so your Geeni light stops blinking.

Are There Any Special Instructions for Stopping the Blinking Specific to Your Geeni Light Type? 

The blinking behavior of Geeni lights may vary by type, so it’s important to check the instructions included with your light for any special instructions related to stopping the blinking. However, if there are no specific instructions or if you have lost your original documentation, here are some general tips for how to stop a Geeni light from blinking:

  • Press the Reset Button: Most Geeni lights have a small reset button that can be used to reboot the light and stop it from blinking.
  • Check your Wi-Fi connection: If your Geeni light isn’t successfully connected to your home network, it may start blinking to indicate a connection issue. To resolve this, ensure the light is properly connected to your Wi-Fi network.
  • Check for a Software Update: Geeni Lights often have software updates that fix bugs or add new features, so check if any updates are available for your device.
  • Unplug and Reset the Power Source: If none of the above steps work, you may need to unplug the light and reset the power source. This should resolve most issues related to blinking lights.
Properly Connected to Your Wi-Fi Network

If you’ve tried all of these steps and your Geeni light is still blinking, it may be best to contact customer service for additional troubleshooting assistance. They can help diagnose potential issues and provide solutions specific to your device.


In conclusion, Geeni lights can be a great way to add light and style to any space. However, if your Geeni light is blinking, it could indicate an issue with the device or its settings. To stop your Geeni light from blinking, check that all connections are secure, reset your device to factory settings, and use a compatible power source.

If you need help with these steps, you may need to contact customer service for additional assistance. Once the issue has been resolved, your Geeni light should function properly. Reading this post has helped you learn how to stop geeni light from blinking. Make sure the safety precautions are carried out in the order listed

Photo of author

Jennifer Branett

Leave a Comment