How to Reset Hid Ballast

Do you have any HID ballasts in your lighting system that are malfunctioning? If so, don’t despair – with just a few easy steps you can reset the ballast and get them running again.

How to Reset Hid Ballast

In this blog post we will guide you through how to reset Hid Ballast, as well as give some guidance on troubleshooting techniques should this fail to resolve the issue. This is essential knowledge for anyone who works with lighting systems; read on to learn more!

Tools and Materials You Will Need to Reset Hid Ballast

  1. A flathead screwdriver
  2. Insulating gloves
  3. Test light or ohmmeter
  4. Voltage detector (optional)
  5. Safety glasses
  6. Zip ties
  7. Hid ballast wiring diagram (included with ballast)
  8. Screwdrivers and pliers for ballast installation
  9. Flashlight and/or drop light

Step by Step Guidelines on How to Reset Hid Ballast

Step 1: Disconnect the Ballast

Before you reset Hid Ballast, it is essential that you disconnect the power source to avoid electric shock. Use insulated gloves when handling wiring around electricity sources and wear safety glasses for added protection. Once disconnected from the power supply, remove any components connected to the ballasts. This includes the wiring, ballast box cover, and any mounting screws or brackets.

Use Insulated Gloves When Handling Wiring

Step 2: Inspect the Wiring

Once you have disconnected all components from the ballasts, use a test light or ohmmeter to check for continuity between them. A voltage detector can also be used if available but is not necessary. Additionally, inspect the wiring itself for signs of damage such as fraying, kinks, or other indications of wear.

Step 3: Check the Voltage

Once you have inspected the wiring connections, it is important to check that the voltage is correct. To do this, use a multimeter set to AC and plug it into a live outlet near the ballast.

Make sure that the reading is within the acceptable range for the wattage of your ballast. While you are checking the voltage, also check for any loose connections or wires that may be interfering with the ballast’s performance.

Step 4: Reconnect the Wiring

Once you have checked all of the components and wiring, it is time to reconnect them correctly. Be sure to refer to your HID ballast wiring diagram in order to ensure everything is wired correctly. If you have a new ballast, make sure to connect the wiring according to the manufacturer’s instructions. This will help ensure that the ballast functions correctly.

Step 5: Test the Ballast

After reconnecting all of the components, it is time to test the ballast. Plug in the power supply and turn on the switch. If everything is functioning correctly, you should see a bright light emanating from the bulb. If not, check for any loose connections or wiring problems and refer to your ballast wiring diagram if necessary.

By following these five steps, you should be able to successfully reset Hid Ballast and get them working again. While it may take some time and patience, this process is relatively straightforward when done correctly. If you encounter any problems or are not sure how to proceed, do not hesitate to contact a professional for help. Good luck and happy lighting!

Do Not Hesitate to Contact a Professional

Additional Tips and Tricks to Reset Hid Ballast

  1. Check the power wiring to ensure that it is connected properly and securely. This will help ensure a proper reset of the ballast.
  2. Make sure you use an appropriate gauge wire when connecting power to the ballast since too small of a wire may create a voltage drop, making it difficult for the ballast to reset itself.
  3. Always consult the product manual for specific instructions on resetting your HID ballast. It will have steps that must be followed in order to successfully reset the ballast.
  4. If at any point it seems like the ballast is not properly resetting, or if you smell smoke, immediately disconnect power and contact a professional to inspect the ballast.
  5. It is important to remember that resetting an HID ballast should only be done by qualified and experienced personnel. Attempting to reset the ballast without proper knowledge can lead to personal injury or damage to the equipment.
  6. After you have successfully reset your HID ballast, be sure to test it with an appropriate light source to ensure it is working properly.
  7. Last but not least, always double check all connections before turning the power back on to avoid any unwanted accidents or malfunctions.
Always Double Check All Connections

Following these tips and tricks can help you successfully reset your HID ballast without issue! Remember that if you are ever in doubt, do not hesitate to call a professional for assistance.

Things You Should Consider to Reset Hid Ballast

  1. Make sure the HID ballast is in working condition. If it does not respond to voltage, then resetting will be impossible and you might need to replace the ballast altogether.
  2. Check if the power source is connected properly and that there are no loose connections or wiring issues which could be causing problems with the ballast’s functioning.
  3. Make sure that the light bulbs are properly fitted and not burned out, as this could also cause the ballast to malfunction.
  4. Read the instructions of your specific HID ballast model to understand reset procedures. It is important to follow the directions precisely in order to ensure proper resetting and functioning of your ballast afterward.
  5. Turn off the power to the ballast before attempting any type of reset. This step is necessary for safety reasons and should not be overlooked.
  6. Disconnect the ground wires from the terminals located on either side of the ballast and leave them disconnected while performing a reset. This will help ensure that you get an efficient reset process without any interference.
  7. Use the reset switch found on the ballast and press it for a few seconds, making sure to hold it in place until you hear a clicking sound indicating that the resetting process is complete. Once this occurs, reconnect all of your wiring components and turn the power back on to confirm that the reset was successful.

Following these Considerations should help you successfully reset your HID Ballast. As with any electrical project, it is important to exercise caution and always use safety procedures to avoid any potential hazards or damage. If the ballast still does not respond after performing a reset, then you may need to replace it altogether.

Precautions Need to Follow for Resetting Hid Ballast

  1. Make sure to turn off the power source before beginning any work on your HID ballast. It is important to avoid electric shocks as well as damage to other electrical components.
  2. Before you begin, make sure that all of the connections are tight and secure. If any of them appear loose or damaged, they should be replaced before continuing.
  3. When resetting the ballast, make sure that you replace the bulbs with new ones of the same wattage and type as previously installed.
  4. Ensure that all wiring is correct before reconnecting power to the ballast by double-checking it with a multimeter or other testing device.
  5. Once everything is connected correctly, turn on the power source and test the new ballast by turning on the lights. You should see that they are working properly without any issues.
  6. If there are any signs of flickering or dimming, make sure to double check all your connections before looking for a replacement part.
Test the New Ballast by Turning on the Lights

Following these precautionary steps will ensure that your HID ballast reset is successful, allowing for the lights to function properly. With proper installation and maintenance, your HID lighting system should be able to last you years without any issues.

And with a reset ballast, you can extend its life even further! So take some time and make sure that everything is done correctly so you don’t have to worry about it in the future. Happy lighting!

Common Mistakes in Resetting Hid Ballast

1. Ignoring the Ballast Type: 

It is important to note that different types of HID ballasts need to be reset differently. In particular, magnetic and electronic ballasts must be reset with specific instructions depending on their type and model. You have to be careful you do not mix up the instructions for one type with another as this can damage the ballast.

2. Setting Incorrect Voltages: 

Many HID ballasts need to be set to a certain voltage in order for them to work properly. Make sure that you have checked the manufacturer’s specifications and that you know the correct voltage settings for your ballast. If you set the voltage too high or too low, it can lead to poor performance or even damage the ballast.

3. Not Unplugging All Wires: 

It is important to make sure that all of the wires connected to the ballast are unplugged before resetting it. Any wire that remains plugged into the ballast can cause it to malfunction and keep it from resetting properly. This can lead to poor performance and even damage the ballast.

4. Not Resetting the Capacitor: 

It is also important to reset the capacitor when resetting an HID ballast. The capacitor stores energy and needs to be discharged before it can be reset properly. If you do not discharge this before attempting to reset, it can cause serious problems with the ballast.

It is Also Important to Reset the Capacitor

5. Not Resetting in the Correct Order: 

When resetting an HID ballast, it is essential to follow the instructions in the correct order. If you do not begin at step one and move through each step as specified, it can cause problems with the ballast and lead to poor performance or even damage it beyond repair.

By avoiding these common mistakes, you can ensure that your HID ballast is reset properly and that it performs as expected. It is important to always read the instructions for the specific ballast model before attempting any type of resetting procedure. This will help to prevent any errors that could cause damage or performance issues.

Frequently Asked Questions

What is a Hid Ballast? 

An HID ballast is an electronic device that’s used to regulate the current and voltage of a gas discharge lamp, such as a metal halide or high-pressure sodium light. The ballast helps to ensure that the lamp operates safely and efficiently, providing consistent illumination for any given application.

What are the benefits of resetting an HID Ballast?

Resetting an HID ballast can help to increase the lifespan of the lamp, reduce energy consumption, and ensure optimal performance. Additionally, resetting a ballast helps to prevent flickering or sudden surges in light levels that can be caused by power fluctuations due to storms or other external sources.

How do I reset an HID Ballast?

To reset an HID ballast, first, turn off the power to the light fixture. Unplug the lamp and remove it from the fixture. Then, locate the ballast’s main power supply and disconnect all power cables connected to it. If necessary, refer to your user manual or contact the manufacturer for further instructions.

Once the power has been disconnected, wait a few minutes before reconnecting it. This will help to reset any current settings and ensure that your ballast is running properly again.

Are there any risks associated with resetting an HID Ballast?

As long as you follow proper safety procedures and take all necessary precautions, resetting an HID ballast should not pose any risks. However, it is always recommended that you consult a qualified electrician if you are unsure about the steps involved or any potential hazards associated with the process.

Follow Proper Safety Procedures


Resetting an HID ballast is easy once you understand the mechanics and process involved. With the help of this blog post, you now have the information and knowledge on how to reset Hid ballast easily and safely.

Remember to ensure that you are adhering to state and local regulations with regard to safety measures while you are performing this process. Make sure that you reach out to a professional if you need additional assistance, as they will be able to help guide you through more complex issues related to resetting ballasts. Now, take all of this knowledge and get ready to start resetting your HID ballast!

Photo of author

Jennifer Branett

Leave a Comment