How to Hang Christmas Lights on Hardie Board

Hardie board is a composite material that can be used as exterior siding on your home. It is durable and attractive but requires extra care when hanging items like Christmas lights. The best way to hang Christmas lights on the Hardie board is to use screws designed for this purpose. Installing the screws in the correct way ensures that the lights are properly secured and won’t come loose or slip out of place.

How to Hang Christmas Lights on Hardie Board

The main advantage of using Hardie Board to hang Christmas lights is its superior durability. Hardie Board has special weather-resistant features, which can withstand even the harshest winter conditions. This means you don’t have to worry about your Christmas lights failing due to ice or snow. In this blog post, You will learn in detail how to hang christmas lights on hardie board.

Step-by-Step Processes for How to Hang Christmas Lights on Hardie Board

Step 1: Inspect the Hardie Board

Before you begin to hang Christmas lights, inspect the Hardie board. Look for any signs of damage or lose boards and repair them before you start. Choose outdoor-rated Command Strips, screws, or nails that are appropriate for the type of lights you will be using. Be sure to select a heavy-duty adhesive like Command Strips when hanging heavier items that require extra support.

Step 2: Measure and Mark the Areas for Hanging Lights

Measure out the areas on which you want to hang lights, then mark them with a pencil. Make sure these areas are easy to reach from the ground. If you are using Command Strips, attach the strips to the Hardie Board to create an anchor point for your lights.

Step 3: Attach Your Lights and Accessories

Depending on the type of lights you use, attach them directly to the Hardie Board or use a support system such as a chain or wire to keep the lights in place. If you are installing electrical supplies, be sure to use all safety precautions, such as wearing protective gear and reading the instructions thoroughly before beginning.

Depending on the Type of Lights You Use

Step 4: Connect Lights to Your Power Supply

Once your wires are safely connected, plug in your lights to a power supply that is compatible with the type of lights you are using. Once your lights are securely connected, use screws or nails to secure them in place on the Hardie board. Be sure not to damage any wiring while doing so.

Step 5: Test Christmas Lights Before Finishing

Carefully test all of your lights before finishing the project. Check for any shorts or faulty connections and ensure everything works properly. Once you have finished hanging up your lights, sit back and enjoy the beautiful display.

By following these steps, you can easily hang Christmas lights on your Hardie Board. With the right supplies and a little bit of patience, you can create an amazing light display that will last year after year.

Tips for How to Hang Christmas Lights on Hardie Board

  1. Make sure to wear protective gear like glasses or goggles, gloves, and a mask when performing the task.
  2. Use an extension ladder instead of a stepladder for greater stability and safety while hanging lights in higher places. It should be placed at a distance from the wall so you have enough space to work with.
  3. Check the lights for any damage and ensure the bulbs function properly before being put up.
  4. Use non-conductive materials such as plastic hooks, clips, or insulated staples to secure the wires onto the Hardie Board to prevent electrical shock hazards.
  5. Use zip ties instead of nails to hang heavier items such as large light strands or 3-dimensional displays.
  6. Ensure the lights are connected to a ground fault circuit interrupter (GFCI) outlet before plugging them in to prevent electric shock.
  7. Do not overload outlets with multiple plugs and extension cords; this can cause overheating and put you at risk of electrocution.
  8. Turn off the electricity to the area before beginning work, and turn it back on after all the lights are hung securely in place.
Lights Are Hung Securely in Place

Following these tips can help you enjoy a festive holiday season without any accidents or injuries.

What Steps Should You Take to Remove the Christmas Lights From Your Hardie Board After the Holiday Season is Over? 

Once the holiday season is over, it’s time to take down your Christmas lights from your Hardie Board. While this may seem daunting, with careful planning and preparation, you can easily remove the lights without damaging your siding. Here are some steps you should take to remove them safely:

  • Disconnect any power sources to the lights, and ensure all the bulbs are cool before you handle them.
  • To avoid damaging your Hardie Board, gently pull out each light clip individually. If they seem stuck, use a flathead screwdriver to carefully pry them loose without damaging the siding below.
  • Carefully remove any nails that you may have used to hold the lights in place, and collect them for reuse next year.
  • Once all of your clips and nails are removed, bundle up the lights neatly so they are easy to store away until next season.
  • Finally, use a damp cloth to wipe away any residue left behind from the clips or nails. This will help protect your siding and make it easier to hang the lights again next year.

Following these steps should help you safely and easily remove your Christmas lights from your Hardie Board without causing any damage.

How Can You Store the Lights for Next Christmas Without Them Becoming Tangled or Damaged? 

After all the hard work of putting up your Christmas lights on your Hardie Board, you want to ensure they will be in good condition when you take them down for storage. To help ensure that happens, there are a few steps you can take:

  • Carefully remove the lights from the board. Gently pull each strand of lights off the board and ensure not to snag or pull any wires.
  • Separate the strands of light and coil them up separately. This will help ensure that they don’t become tangled when you store them away.
  • Wrap each strand in a soft cloth or bubble wrap before packing them away for storage. This will help protect them from any bumps and scratches that could occur while moving or storing the lights.
  • Store in a cool, dry area away from direct sunlight and moisture. Keep them out of any damp areas, as this can cause corrosion on the wires over time.
Wrap Each Strand in a Soft Cloth or Bubble

Following these steps will help ensure your lights are in great shape and ready to use next year.

Are There Any Environmental Concerns Associated With Hanging Christmas Lights From Hardie Board? 

When it comes to hanging Christmas lights on Hardie Board, there are a few environmental concerns that you should consider. The most important is the potential for water damage due to moisture seeping into the board and damaging your lights. There is also the potential for fire hazards if too many lights or wires are used in an area with limited air circulation.

To prevent water damage, it’s important to properly seal all holes and seams where Christmas lights are being affixed to the Hardie Board. This can be done with a sealant designed specifically for use on masonry or siding materials, such as Liquid Nails brand spray foam insulation.

Additionally, ensure that all electrical connections and plugs are properly insulated with outdoor-rated wiring and that any light strings are rated for outdoor use. To prevent fire hazards, ensure that the number of lights being used is not too large for the area where they are being hung.

Is It Possible to Hang Led Christmas Lights From Hardie Board, and if So, How Should You Do It? 

Yes, it is possible to hang LED Christmas lights from Hardie Board. Hardie board provides a durable and secure structure to which you can attach your outdoor holiday lighting. To do so, you will need special anchors specifically designed for use with Hardie Board. Once the anchors are in place, attach the Christmas lights to the desired locations.

To hang Christmas lights from Hardie Board, you will first need to purchase special anchors designed for use with cement-based siding such as Hardie Board. These anchors are meant to be drilled into the siding and used as a support system for attaching lights and other decorations.

Hang LED Christmas Lights

Once you have the anchors in place, you can then use them to attach your Christmas lights. Depending on the type of light you are using, this may require screws or clips. Be sure to make sure that the lights are securely attached and that they do not move around once installed.


In conclusion, hanging Christmas lights on Hardie Board can be a great way to add a festive and decorative touch to your home’s exterior. With the right tools and supplies, you can easily create an eye-catching display with minimal effort.

Be sure to use outdoor-rated lights, avoid using nails, use secure clips or hooks for the sturdiest results, and plug your lights into a GFCI-protected outlet to be extra safe. I hope this article has been beneficial for learning how to hang christmas lights on hardie board. Make Sure the precautionary measures are followed chronologically.

Photo of author

Jennifer Branett

Leave a Comment