How to Fix a Lava Lamp After Shaking It

The reasons to know of fixing a lava lamp after shaking it are plentiful. Lava lamps tend to be fragile, and if they’re not handled with the utmost care, can easily be broken. Knowing how to properly troubleshoot a lava lamp after it is shaken can help save time and money in the long run.

How to Fix a Lava Lamp After Shaking It

One of the biggest advantages to knowing to fix a lava lamp after shaking it is that you can save time, money and energy. By taking the proper steps to troubleshoot and repair your lava lamp, you can avoid an expensive replacement or costly visit from a professional repair service. You can find step-by-step instructions on how to fix a lava lamp after shaking it in this blog article.

Step by Step Processes for How to Fix a Lava Lamp After Shaking It

Step 1: Inspect Your Lamp

Take a few moments to inspect your lamp and the surrounding area for any damage. If you notice any cracks, chips, or broken parts in both the glass and plastic components of the lamp, it’s best to replace it entirely.

Step 2: Check Baseplate Connection

Carefully check the connection between the baseplate and power cord to ensure that all electrical components are in working order. If the connection seems loose or if it’s not secured properly, don’t attempt to use the lamp and contact a professional for repair services.

Step 3: Clean Lamp Components

Use a damp cloth to carefully clean and dust off both the glass and plastic components of your lava lamp. This will help ensure they’re in good working order. If your lamp is still not working, check the wattage of the bulb to make sure it’s compatible with your lamp. If it’s too high or low, replace it with a new bulb with the appropriate wattage level.

Use a Damp Cloth

Step 4: Check for Air Bubbles

Gently shake and inspect your lava lamp to see if there are any air bubbles present. If you do find some, they should dissipate over time as the lamp warms up. If the fluid level in your lava lamp is low, you’ll need to refill it with the appropriate lava fluid. This can typically be done at any home improvement store or through a specialized retailer.

Step 5: Heat Lamp Slowly

Once your lava lamp is re-filled and clean, plug it in and heat it slowly over time until the wax begins to liquify. This process may take several hours, so patience is key. If your lava lamp still isn’t working properly after following these steps, you may need to troubleshoot any further issues. This can be done by taking your lamp to a professional repair service or replacing some of its components if possible.

Step 6: Place Lamp in Desired Location

Once the lamp is functioning correctly, you can place it in its desired location. Make sure to keep it away from direct sunlight and sources of heat or cold to ensure that it works at its best performance.

Finally, sit back and enjoy your new lava lamp! Your lamp will now be working properly and should provide you with a calming and mesmerizing atmosphere. Just remember not to shake it too often, as this can cause issues in the long run.

Tips for How to Fix a Lava Lamp After Shaking It

Unplug and Turn Off the Lava Lamp
  1. Unplug and turn off the lava lamp immediately after shaking it, to prevent any dangerous electrical hazards from occurring.
  2. Use caution when handling the lava lamp parts, as they may be hot or sharp. Wear gloves to protect your hands and fingers.
  3. Carefully check for any visible damage on the inside of the lava lamp before you attempt to reassemble it.
  4. Use a soft, clean cloth or tissue to carefully wipe away any glass shards that may have broken off the lamp during shaking.
  5. If the wax has solidified on its own, you can reheat it using a hairdryer set to low heat for 1-2 minutes.
  6. Always follow instructions included with your lava lamp for proper assembly and use.
  7. Make sure to keep the lid securely closed when the lamp is plugged in and turned on, to avoid any potential accidents or injuries.

Also, make sure that the liquid is not too low or too high before turning it on; otherwise, it could cause a fire hazard or other damage to the lamp. Additionally, be sure to only use the recommended wattage bulb with your lava lamp as this will help prevent overheating and extend its life.

What Kind of Damage Can Occur if the Lava Lamp is Not Properly Fixed?

If the lava lamp is not properly fixed after shaking, various kinds of damage can occur. This includes cracks in the glass container, which can cause the colored liquid to leak out and potentially expose electrical components inside the lamp.

Cracks in the Glass Container

Additionally, it could result in an imbalanced mixture of wax and liquid causing them to become stuck within the device. If this happens, it may cause the lamp to stop working altogether. It is therefore important to take proper steps to repair a lava lamp after it has been shaken.

How Long Does It Usually Take to Complete This Kind of Repair?

The amount of time it takes to repair a lava lamp after shaking it varies depending on the severity of the issue. Generally, minor repairs can be completed within about an hour, while more extensive repairs might take several days. Be sure to follow all manufacturer instructions carefully for best results.

It’s also important to make sure that you have all the necessary tools and supplies before beginning the repair. The most essential items for lava lamp repairs are a screwdriver, some pliers, and replacement parts such as a new bulb or wax container. Having these items on hand can make the repair process much faster and easier.

What Type of Maintenance and Care Should Be Taken With a Lava Lamp in Order to Prevent Future Damage?

In order to keep your lava lamp in good working condition, there are a few basic maintenance and care steps that should be taken. First and foremost, it is important to never shake or move the lava lamp too quickly or harshly. Since these lamps contain liquid and often electrical parts, any sudden movements could cause the liquid to spill out or even damage the internal components of the lamp.

Additionally, if you feel that the liquid needs to be topped off, only use a complimentary replacement solution specifically designed for lava lamps, as regular tap water can cause damage to the internal components.

Lastly, it is important to make sure that your lava lamp remains away from direct sunlight and any other source of excessive heat. This will help ensure that your lamp continues to work properly for years to come.

Are There Any Special Cleaning Supplies That Can Be Used on the Outside of the Lamp in Order to Maintain Its Appearance?

Yes! You can use a mild detergent like dish soap to gently clean the outside of your lamp. Make sure to wipe it down with a dry cloth afterwards so that no water or soap residue is left behind. If you want to go a step further in protecting and maintaining the appearance of your lamp, you can also purchase a spray-on sealant that will provide a protective layer from dirt and dust.

Make sure to read the instructions on the label before use, however, as some sealants may not be suitable for certain surfaces or materials. Additionally, avoid using abrasive cleaners and cloths that could cause scratches or damage to the lamp’s surface. With proper cleaning and maintenance, your lava lamp can continue to look great for years.

You Can Use a Mild Detergent

Are There Any Professional Services Available for Repairing or Maintaining a Lava Lamp?

If you have a lava lamp that you’ve accidentally shaken, it can be difficult to know how to fix it. However, if your lava lamp is still causing problems after following the steps outlined above, you may want to consider contacting a professional service for help.

There are many companies that specialize in repairing and restoring vintage or antique lava lamps. These companies will have the knowledge and experience necessary to repair your lava lamp, as well as give you advice for proper maintenance in the future.

In addition, many hardware stores carry replacement parts that can be used to fix a damaged or malfunctioning lava lamp. Before attempting any repairs yourself, be sure to consult with a professional service first – they will be able to recommend the best course of action for repairing your lamp.

It’s also a good idea to research the different parts and components that make up a lava lamp before attempting any repairs.


In conclusion, fixing a lava lamp after shaking it is not necessarily difficult but requires patience and care. It’s important to remember that these lamps are fragile and, if handled incorrectly or with too much force, can be irreversibly damaged. If the wax has been mixed up, it may take some time for the wax to separate again and for the lamp to return to its normal, functioning state.

Additionally, if the lamp is not functioning properly after being shaken, it is important to seek professional advice and assistance. With the right care and instructions, fixing a lava lamp after shaking it is entirely possible. I hope this article has been beneficial for learning how to fix a lava lamp after shaking it. Make Sure the precautionary measures are followed chronologically.

Photo of author

Jennifer Branett

Leave a Comment