How to Connect Remote to Led Strip Lights

If you’re looking for a convenient and space-saving way to brighten up your living or workspace, remote-controlled LED strip lights may be the answer. From adding subtle accent lighting to providing general illumination that helps create a cozy ambiance in any room or hallway, they can provide unique decoration elements and be programmed to fit whatever mood or activity you’re aiming for.

How to Connect Remote to Led Strip Lights

While it might seem intimidating at first, connecting a remote control to your LED strip lights is actually quite simple once you know how! In this post, we’ll offer step-by-step instructions how to connect remote to led strip lights so let’s get started!

The Benefits of Connecting Led Strip Lights to a Remote

One of the biggest benefits of using LED strip lights that have a remote control is the ability to adjust the brightness and color without having to leave your seat. This makes them an ideal choice for parties, as you can dial up or down the intensity of your lighting effects for maximum impact.

You also have complete control over the color of your lights, allowing you to pick from a wide spectrum that ranges from cool blues and greens to warm reds and yellows. This also makes them perfect for use in a home theater setup, where you can quickly switch between shades to create the perfect cinematic experience.

Can You Connect the Remote to Led Strip Lights?

The answer is yes! With the right knowledge, you can easily connect a remote to your LED strip lights in no time. It is possible to connect the lights to a remote with only the use of the included adapter, or you can purchase a compatible one separately if needed.

Required Items

To get started, you’ll need to have a few items on hand:

  • LED strip lights and remote control
  • An adapter (can be included or purchased separately)
  • Phillips-head screwdriver
Phillips-head Screwdriver

6 Steps on How to Connect Remote to Led Strip Lights

Step 1: Gather Supplies

Begin by gathering all of the necessary items. You should have a remote control, LED strip lights, and an adapter (if needed). If you have a compatible adapter, make sure it is plugged into an outlet and ready to go.

Step 2: Install the LED Strip Lights

Next, you’ll want to properly install your LED strip lights following the manufacturer’s instructions. This typically involves securing them in place with double-sided tape or adhesive strips and then plugging them into a power source.

Step 3: Connect the Remote to the Adapter

Once your LED strip lights are in place, you can begin connecting them to your remote control. Start by plugging the adapter into the end of the strip and then connecting it to your remote with either an included cable or one purchased separately.

Step 4: Program the Remote

With the adapter connected, you can now begin programming your remote. This should include setting up individual channels for each color and brightness level, as well as any other features you might want to add. Consult the instruction manual that came with your remote for further help in this step.

Step 5: Test it Out

Once everything is programmed and connected, it’s time to test out your setup. Use the remote control to change between different colors, brightness levels, and other effects to ensure that they all work as desired.

Step 6: Enjoy!

Now that you’ve successfully completed this project, you can enjoy using your LED strip lights with the convenience of remote control. You can quickly change the lighting in any room or hallway, creating the perfect atmosphere for whatever occasion you’re planning.

Enjoy Using Your Led Strip Lights

And that’s how to connect remote to led strip lights! With these easy steps, you should now have your own custom lighting setup ready to go.

7 Safety Precautions

1. Make sure to read all instructions that accompany the LED strip lights, remote control, and/or any additional accessories before connecting. Additional safety precautions may need to be taken beyond the scope of this article.

2. Ensure that you’re using LED strip lights with a power adapter, transformer, and/or other appropriate power sources. Power adapter and transformer specifications must match the requirements of the LED strip lights.

3. Turn off power to all devices before making any connections or adjustments. It’s also good practice to wear protective rubber gloves when handling electronics. Turning off the power will also help prevent electric shock.

4. Make sure that you’re using the remote control and LED strip light systems designed to be compatible with each other, as connection protocols between different manufacturers and models may not be compatible.

5. Check the length of your LED strips against the distance they need to cover. LEDs connected in series will require more power than those connected in parallel. If the length of your LED strips exceeds the distance they need to cover, consider using a power distribution block or additional power supplies to prevent overloading.

6. When cutting the LED strip lights, be sure to cut along the designated lines and only cut once. Cutting multiple times could damage the strip lights and impair their performance.

7. When soldering or connecting wires to the LED strips, take extra caution: never connect more than one wire to the same terminal. Doing so could cause an electrical short and damage both the LED strip lights and remote control system.

By following these basic safety tips, you can ensure that your LED strip lights are 

properly connected to the remote control system. By taking the time to double-check your connections and following the instructions, you can ensure that your lighting setup runs safely and efficiently.

7 Maintenance Tips and Tricks

1. Make sure that the wire connections are secured and tight. Loose wires can interfere with the connection between the remote and the LED strip lights. The wire connections should be firmly screwed in and checked regularly to ensure that they are still secure.

 Use a Surge Protector

2. Ensure that the LED controller is plugged into a reliable power outlet. The LED strip lights will not work properly if they are connected to a faulty outlet or one that has too much voltage running through it.

3. When connecting the remote to the LED strip lights, make sure that the right channels are being used. The controller should be connected to a channel that can handle its voltage and amperage requirements.

4. If possible, use an external power supply for your LED strip lights. This will provide more power and stability, resulting in a better connection between the LED strip lights and the remote.

5. Use a surge protector to protect your LED strip lights from sudden power outages or surges. This will ensure that the connection between the controller and the LED strip lights is not interrupted.

6. Make sure that your remote has fresh batteries in it so that it can adequately control your LED strip lights. Running out of battery power may disrupt the connection and cause your LED strip lights to flicker or become unresponsive.

7. Check the voltage measurements periodically to make sure that everything is running properly and efficiently. Poorly maintained wiring can reduce the lifespan of your LED strip lights and remotely connected accessories.  By regularly checking the wiring and connections, you can ensure that your LED strip lights are working at their best.

By following these tips, you can easily connect your remote to your LED strip lights and keep them in good working condition for years to come. With regular maintenance and proper setup, you can enjoy a reliable connection between the two components.  

Furthermore, you can reduce the chances of any issues occurring in the future.  With good care and upkeep, your LED strip lights will remain connected to your remote for a long time.

Frequently Asked Questions

How Long Will It Take to Finish the Project?

The amount of time it takes to finish the project will depend on the size and complexity of the LED strip light installation. Generally, a simple setup should take no more than an hour or two. 

LED Strip Light Installation

However, larger projects may require more time and effort depending on the number of components being connected.  It is important to read the instructions carefully before starting the project to ensure accuracy and safety.  A professional electrician can also help with larger jobs if needed.

What Should I Do If Something Goes Wrong?

If something does not seem to be working correctly, make sure that all of the wires are securely connected and in the correct channels. If the problem persists, it may be necessary to consult a professional electrician for assistance. It is important to remember not to attempt any repairs or modifications on your own, as this can be dangerous and potentially cause more damage.  Furthermore, always ensure that safety measures are taken when working with electricity. 


You should now know how to extend or connect LED strip lights remotely. Although connecting LED strip lights may seem like an intimidating task, it is simpler than it appears. Remember to check the voltage ratings of the LED strip light and remote before connecting them together. Make sure that all connections are solid and secure with appropriate wire connectors.

Furthermore, if you run into issues while attempting to connect the LED strips remotely, be sure to double-check your wiring and project settings, as there may have been a mistake during installation. With these tips on how to connect remote to led strip lights in mind, you can easily have beautiful LED light effects throughout your entire project!

Photo of author

Jennifer Branett

Leave a Comment