Are you looking to add some interesting ambiance to your space? Govee LED lights offer an easy and flexible way to bring creative lighting into any room. With a few simple steps of cutting the strip light, you can create a custom look that meets your specific design needs.
In this blog post, we’ll help you understand how to cut Govee LED lights, as well as talk about when and why it’s necessary. So grab some scissors or wire snips and get started! Let’s learn together how easy it is to customize these amazing lighting options for just about any area around the home.
Will Led Lights Still Work if You Cut Them?
The short answer to this question is “No.” Govee LED lights are designed to be used in a continuous strip, and cutting them could potentially damage the wire circuits inside of the light. Also, cutting the strip may cause it to lose power or not work properly. Therefore, it is not recommended to cut Govee LED lights.
If you wish to shorten the length of your Govee LED lights, it’s best to purchase a power adapter and cut off any extra wire instead. This will ensure that your LED lights are functioning correctly without compromising their safety or functionality. Additionally, when cutting wires, make sure to watch out for live wires and take necessary precautions before attempting any modifications.
For more information on how to properly cut Govee LED lights, please refer to the manual that came with your product or contact the manufacturer directly for assistance. With the right tools and some patience, you’ll be able to successfully modify your LED strip lighting system in no time!
10 Effective Methods How to Cut Govee Led Lights
1. Use a Sharp Knife.
When cutting Govee LED lights, it is important to use a sharp knife so that you can make precise cuts. A dull blade may damage the strip and cause it to not work properly. Be sure to use a sharp knife that won’t snag on the strip or cause any damage.
To ensure a clean cut, you may want to use a ruler and make multiple passes with the knife. Although cutting Govee LED lights requires a little bit of skill, it is relatively easy and will allow you to customize your lighting setup. However, be sure to take your time and do it correctly.
2. Use a Cutting Board.
Once you have the proper cutting tool, you will need to find a secure and stable surface for your project. A cutting board is the best option for cutting Govee LED lights. Place the cuttable section of your light strip onto the board, making sure it is secure and won’t slip while you are working.
This step will help to ensure that your cuts are straight and correct each time. To make sure the board is stable, you may want to use a few books or other heavy items to keep it in place. While you work, make sure to keep your fingers away from the blade for safety.
3. Cut at a 45-Degree Angle.
After you have marked the area where you want to cut, take a pair of scissors and begin cutting at an angle. It is important that you cut the LED strip at a 45-degree angle to ensure that it will fit properly into the end caps.
Also, make sure that you don’t cut too close to your intended spot as this might compromise your connection when inserting them into the end cap. Though it may take some practice, try to cut as cleanly and accurately as possible. Once you have finished cutting the strip, proceed with adding the end caps.
4. Cut with the Grain of the Led Light.
When cutting Govee lights, make sure to cut them with the grain of the light. Doing so will help ensure that you get a clean and straight cut that won’t leave any rough edges or jagged lines. This step is especially important if you plan on using your Govee lights in areas where they will be visible, such as on the front of a house or in a business. To find the grain, look for lines running along the length of each individual LED light – cutting with these will give you the most even and clean cut possible.
5. Use a Saw.
A handheld saw can be used to cut Govee LED lights into smaller sections. When using a saw, it’s important to ensure that the blade is flat against the board without any wobbling or misalignment. To make sure you get an accurate and clean cut, use clamps to hold the board in place while cutting. Additionally, make sure to wear safety glasses and gloves while sawing.
Lastly, avoid pressing too hard on the blade – apply just enough pressure for it to cut through the board. With these tips in mind, use a saw to cut your Govee LED lights into smaller sections! Make sure to read the manufacturer’s instructions before attempting to use a saw.
6. Use a Power Drill.
If you don’t have a good pair of scissors, power drill can also be used to cut Govee LED lights. Be sure to use the correct size and shape of bit for your light strip. Attach the bit to the drill and start cutting. Make sure to keep a steady hand while doing this as it can easily become uneven.
Once you’ve finished cutting, use a pair of pliers to remove the excess LED light strip and you should be good to go. Always remember to wear safety glasses while using power tools. If you don’t feel comfortable using a power drill, then it is best to stick to scissors. Also, it is best to practice on a scrap piece of LED light strip before using them for your project.
7. Use a Dremel Tool.
If you have thicker strips of Govee LED lights or need to make hard-to-reach cuts, a Dremel tool can be the perfect solution. It uses a power rotary cutting tool that can easily slice through your lighting strips. To use a Dremel tool to cut Govee LED lights, hold the strip in place and carefully place the blade of the tool against the cutting line.
Turn on the Dremel and let it do its magic! Make sure to move slowly and take care not to cut any other part of the strip while cutting. When you’re finished, be sure to turn off the power before removing your piece. You can now connect your newly cut strip to the power source and bask in its warm glow.
8. Use an Oscillating Tool.
An oscillating tool is another great option for cutting Govee LED lights. It utilizes a small blade that vibrates in an elliptical shape, allowing it to make precise cuts without damaging the LEDs. Start by attaching a triangular carbon steel saw blade to your oscillating tool and setting the speed according to manufacturer instructions.
Place the Govee LED light into the blade and make sure it is firmly secured. Then, start cutting with slow, steady movements. Once you have cut your desired length of Govee LED lights, unplug the oscillating tool and remove the cut pieces.
9. Use a Jigsaw.
A jigsaw is a great tool for making intricate cuts in Govee LED lights. Start by measuring the exact size of your desired cutout and draw it on the strip using a marker or pen. Use a jigsaw to make the cut, taking extra care not to damage any of the other circuits on the strip. When you’re done, you should be able to fit the strip into your desired shape.
With a jigsaw, you can make sharp corners and precise angles that would otherwise be impossible with other tools. Just make sure to keep the blade of the jigsaw at a safe distance from the circuits on the strip. After cutting, you may need to use a soldering iron to connect the two ends of the strip.
10. Use a Handsaw
When installing Govee LED lights, you may need to cut them into pieces. To do so, you can use a handsaw or electric saw to make the cuts. When using a handsaw, it is important to remember that you should always cut away from yourself and wear protective gear such as eye protection and gloves.
Make sure not to apply too much force when cutting, and take your time for the best results. Once you have made the required cuts, you can move on to installing your Govee LED lights. With these easy steps, you’ll be able to safely and easily cut your Govee LED lights. Good luck!
Conclusion
In conclusion, cutting Govee LED lights is a great way to customize and accentuate your living spaces. Whether you’re looking for under cabinet lighting or accent lighting for artwork, the flexible nature of Govee lights makes the possibilities endless.
With the help of some simple tools and a stable workspace, you can make precision cuts without fear of electric shock or ruining the aesthetic look you desire. Thanks for reading, and we hope this has given you some inspiration on how to cut govee led lights!
